Tools and Supplies

"I use Dremel Tools, you can use any type that you are comfortable using".

They can be found at just about any local hardware store, Or you can order a kit from me that has all the tools that I use in my instructional "how to" video tape collection.

You will need:

1. Dremel Multi Pro Variable Speed Tool (Kit #3962 or Model 295)
   A) I use three of these tools so that I do not have to keep changing bits.
2. Bits and Stones Needed:
   A) Silicon Carbide Grinding Stone #85422
   B) Diamond Point #7120
   C) Cut Off Wheel #409
   D) Mandral Shank #402
3. Electric Engraver Gun #290
4. "Dixon" Red China pencil for drawing on the glass. These can be found at almost any office supply store
5. Regular #2 lead pencil
6. Safety Glasses, Dust Mask, Earplugs. All of these items can be found at your local hardware store.
7. Flat glass can be obtained from any Glass Store that carries plate glass and they will usually give you their scraps.
8. Glasses, decanters, vases, bowls can be found at almost any department store.

If you are unable to find any of these tools or supplies in your area, contact me and I will help you.

Wayland H. Cato III
E-Mail: Wayland@Catoglass.com
7507 Folger Dr. Charlotte, NC 28226
Phone/Fax (704)365-1623

Contents of this screen are expressly prohibited without the prior written consent of Wayland H. Cato III & Rhonda Gibson Productions, LLC., or any corporation advertised on this page. The contents of this screen may be used for private, non-commercial use only.